Legacy Accessories

Find all the accessories you need for your FISHER® snowplows and spreaders that are no longer manufactured.

plows

Commercial Blade Guide Kits

Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER® branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.

Part Numbers
#26530K 24" for all models
#51975 36" for all models

Curb Wear Kit

Curbing can come out of nowhere sometimes, protect your blade with a pair of genuine curb guards from FISHER®. Constructed of abrasion resistant material and designed to fit tight to the blade these curb guards will allow you to plow along curbs with confidence and precision, without damaging your blade.

Part Numbers
#51879 For HD Series 7' 6" models
#51879 For HD Series 8' models
#51879 For HD Series 8' 6" models
#51880 For HD Series 9' models

Curb Guard Kit - Cast Iron

Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER®. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.

Part Numbers
#44405 For EZ-V 8' 6" models
#44405 For HD Series 7' 6" models
#44405 For HD Series 8' models
#44405 For HD Series 8' 6" models
#44406 For HD Series 9' models
#44406 For XBLADE all models

Curb/Shoe Kit

Give your XBLADE the total package with this combination curb guard/shoe kit. These simple-to-install curb guards are made from cast iron for increased wear, and feature a rounded profile which reduces damage to curbing as well as the blade. This curb guard is designed to also act as a shoe to improve the blade's ability to float over soft ground.

Part Numbers
#27222 For XBLADE all models

Cutting Edge - Carbide

Looking for a cutting edge with extreme wear resistance? You need to experience one of these genuine FISHER® carbide cutting edges. Made from 3/4" high carbon steel with a carbide insert, this cutting edge can provide up to 15 times the service life of other cutting edges, keeping you out plowing and improving your bottom line.

Part Numbers
#52147 For HD Series 7' 6" models
#52148 For HD Series 8' models
#52149 For HD Series 8' 6" models
#52150 For HD Series 9' models

Cutting Edge - Steel - 1/2" Steel

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#50678 For HD Series 7' 6" models
#5533 For HD Series 8' models
#26460 For HD Series 8' 6" models
#5534 For HD Series 9' models
#28575 For XBLADE 7' 6" models
#27580 For XBLADE 8' models
#27585 For XBLADE 8' 6" models
#27590 For XBLADE 9' models
#28408 For EZ-V 8' 6" models
#26593 For EZ-V 9' 6" models
#3507 For HC 10' models

Cutting Edge - Steel - 3/8" Steel

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#5532 For HD Series 7' 6" models

Cutting Edge - Steel - 5/8" Steel

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#52675 For HD Series 7' 6" models
#52680 For HD Series 8' models
#52685 For HD Series 8' 6" models
#52690 For HD Series 8' 6" models

Deflector - Rubber - 10"

Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.

Part Numbers
#22470-1 For HD Series all models
#27600-1 For XBLADE all models
#21619 For EZ-V 8' 6" models
#26572 For EZ-V 9' 6" models

Deflector - Steel

Extend the height of your blade and help keep snow off the windshield without affecting your ability to stack snow with a genuine FISHER® Steel Deflector. Made of powder coated mild steel, this deflector is designed to be an exact fit for your blade and provide improved plowing efficiency.

Part Numbers
#22269 For LD Series 6' 9" models
#283 For HD Series 7' 6" models
#283 For LD Series 7' 6" models
#26480 For HD Series 8' models
#26485 For HD Series 8' 6" models
#26490 For HD Series 9' models

FLEX ARM Kit

This quick-release, flexible control mount adjusts into any position. The magnetic base allows for easy removal with no mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.

Part Numbers
#62490 For any handheld control

Plow Parka

This heavy-duty FISHER® branded nylon protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.

Part Numbers
#26812-1 For all models

Shoe Kit

Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of high-density polyurethane for longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation.

Part Numbers
#26145 For LD Series all models

SnoFoil® - Steel

Blaze through deep snow with a genuine steel SNOFOIL® from FISHER®. The curved rigid design provides excellent snow rolling performance, which ensures that you have visibility while plowing regardless of the conditions. Made of reinforced steel and coated with our durable Storm Guard yellow powder coating, this kit contains all the necessary hardware and instructions for an easy install.

Part Numbers
#22380
#22200
For 9' models
For 10' models

Spreaders

Ratchet Tie-Down Kit

This tie-down kit provides additional in-bed stability and security. The 4000 pound, high strength shipping straps allow you to add an extra measure of safety as you move heavy loads of salt in your UTV. (Hoppers require bolting to the bed for proper operator safety.)

Part Numbers
#51063 For all models

Auger Tube Restrictor Kit

Prevent leaking issues when using fine pellet, flake or other ice melt products. The material control tube is a sleeve that is designed to ensure that expensive ice melt materials are securely contained and cannot leak out as you drive down the road.

Part Numbers
#51107 For all models

Optimum Flow Kit

The optimum flow accessory is designed to improve material flow and is required in order to distribute a salt/sand mix. The kit contains a secondary vibrator and modified dual pitch baffle. The vibrator aids in keeping material moving inside the hopper while the dual pitch baffle maintains an even feed of material to the auger, preventing bridging and over loading of the auger motor.

Part Numbers
#51106 For all models