Accessories

Blade Accessories
BOLT-ON SHOE KIT

For use on your XtremeV™, XLS™ and XV2™ plows where surfaces are rocky and/or abrasive. This will extend the life of the cutting edge and/or base angle.

Part #50700 (Shoe Kit)

COMMERCIAL BLADE GUIDE KIT

Fluorescent orange, 24" long and made from thick 3/4" nylon tubing these guides bolt-on in place of standard guides.

Part #26530K (Commercial Blade Guide Kit)

CURB GUARD KITS

Protect the outer edge of your snow plow from the wear and tear associated with sidewalks and curbs, with this simple, bolt-on curb guard kit.

Part #44405 (Pair, SD, HD, 8-1/2' EX-V & HT Series)
Part #44406 (Pair, 9' HD, XBLADE and XtremeV)

FLEX ARM KIT

This quick release, flexible control mount adjusts into any position. The magnetic base allows for easy removal plus it eliminates the standard mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.

Part #62490 (FLEX ARM Mount)

PLOW PARKA

This plow cover is constructed of heavy duty nylon, and includes a gathered elastic band sewn into the bottom edge for a tight, weather resistant fit. This long lasting cover takes just seconds to install and provides protection for your snowplow's electrical and hydraulic systems.

Part #26812-1

POLY SNOFOIL®

POLY SnoFoil for the HT Series™ blade features heavy-duty polyethylene construction to withstand tough plowing conditions.

Part #69660 (HT Series)

RUBBER DEFLECTOR

Made from 2-ply rubber, this deflector keeps the snow off your windshield.

Part #69605 (7-1/2' HT Series)
Part #22470-1 (7-1/2'-9' SD, HD)
Part #27600-1 (7-1/2'-9' XBLADE)
Part #44710 (7-1/2'-9-1/2" XtremeV)
Part #50628 (8'-10' XLS)
Part #21619 (8-1/2" EZ-V)
Part #26572 (9-1/2' EZ-V)
Part #22390 (MC)

SHOE KIT

Shoe Kit

Part #27710 (Homesteader)
Part #20505 (HS)
Part #27880 (SD w/26" high blade & HT Series)
Part #26145 (LD w/23" high blade)

STEEL CUTTING EDGE

Made of tough 1084 high carbon steel, these replaceable cutting edges increase wear resistance and improve cutting power and scraping ability.

Part #27713 (6'-8" Homesteader)
Part #27714 (7'4" Homesteader)
Part #5532 (7-1/2' SD, HD, HT Series)
Part #5533 (8' HD)
Part #26460 (8-1/2' HD)
Part #5534 (9' HD)
Part #28575 (7-1/2" XBLADE Center Punched/Reversible)
Part #27580 (8' XBLADE Center Punched/Reversible)
Part #27585 (8-1/2' XBLADE Center Punched/Reversible)
Part #27590 (9' XBLADE Center Punched/Reversible)
Part #44740-2 (7-1/2' XtremeV - 3/8" DS & PS)
Part #44741-2 (8-1/2' XtremeV - 3/8" DS & PS)
Part #44742-2 (7-1/2' XtremeV - 1/2" DS & PS)
Part #44743-2 (8-1/2' XtremeV - 1/2" DS & PS)
Part #44744-2 (9-1/2' XtremeV - 1/2" DS & PS)
Part #44894-1 (XtremeV - Center DS & PS)
Part #50678 (8'-10' XLS, 7-1/2' HD & HT Series)
Part #28408 (8-1/2' EZ-V(R) - 1/2")
Part #26593 (9-1/2' EZ-V - 1/2")
Part #27362 (9' MC)
Part #3507 (10' HC Top Punched)
Part #27239 (10' MC Center Punched/Reversible)

STEEL DEFLECTOR

Deflectors extend the height of your blade to keep snow off the windshield, without affecting your ability to stack snow.

Part #22269 (6'-9" SD, LD)
Part #283 (7-1/2' SD, HD)
Part #26480 (8' HD)
Part #26485 (8-1/2' HD)
Part #26490 (9' HD/MC)

STEEL SNOFOIL

The high continuous curve extends the blade to improve snow rolling action and keep snow off the windshield.

Part #27100 (7-1/2'-9' HD M Series)
Part #8251 (7-1/2' RD H & L Series)
Part #8252 (8' HD H & L Series)
Part #26880 (8-1/2' HD L Series)
Part #8253 (9' HD H & L Series)
Part #22380 (9' MC)
Part #22200 (10' MC)

SUPER GRIP MOUNT KIT

This kit contains adhesive backed locking strips to secure snow plow and spreader controls to interior vehicle surfaces. Strips allow the control to be easily removed yet held firmly in place during use.

Part #20254K (Dual-Lock Fastener Control Mounting Kit)

XBLADE™ SHOE KIT

XBLADE shoe kit offers extra cutting edge wear protection as well as blade edge protection when plowing up against curbings.

#27222 (Curb/Wear Shoe Kit - XBLADE)

XTREMEV™ BACKDRAG EDGE

If backdragging is part of your plowing requirements, optimize your performance by adding these, simple to bolt-on 1/4" edges to your XtremeV plow. (XtremeV backdrag edge is not compatible with curbguard or shoe kits.)

Part #44281-3 (Back Drag Edge Kit - 7-1/2' XtremeV, XV2 DS & PS)
Part #44282-3 (Back Drag Edge Kit - 8-1/2' XtremeV, XV2 DS & PS)
Part #44283-3 (Back Drag Edge Kit - 9-1/2' XtremeV, XV2 DS & PS)

XTREMEV™ BLADE WING KIT

Extend the length and improve the overall operating performance of your plow by adding a pair of blade wings. Wings extend at a 35 degree angle, increasing the overall length of each blade wing by 6".

Part #44610-1 (Blade Wing Kit - XtremeV 8-1/2' & 9-1/2' only)
Part #43511 (Blade Wing Kit - XV2 8-1/2' & 9-1/2' only)

Return to TopPlow Truck Accessories
FULL SIZED STROBE

Outfit your plow truck with these top-of-the-line revolving lights! Manufactured by Whelen Engineering to strict FISHER® specifications.

Part #26019

MINI BAR

Outfit your plow truck with these top-of-the-line revolving lights! Manufactured by Whelen Engineering to strict FISHER® specifications.

Part #26020-1

MINI STROBE

Outfit your plow truck with these top-of-the-line revolving lights! Manufactured by Whelen Engineering to strict FISHER® specifications.

Part #26018-1

PROTUBE™ BUMPER / GRILLE GUARD

Attractive,"off-season" bumper/grille guard designed for use with either the FISHER Minute Mount or Minute Mount 2 System pushplates. Easy 10 minute bolt-on installation and no drilling required. Mounting brackets double as pushplate covers/skid plates and includes tabs for mounting auxiliary fog lamps. FOG LAMPS NOT INCLUDED.

Part #26240 (Black Powder Coat)

Return to TopSnow Plow Maintenance
BLACK PAINT

Genuine factory tough paint provides durable coverage and is mixed to match your original equipment.

Part #20498 (12 oz, spray can, powder coated)

DIELECTRIC GREASE

Fisher Engineering recommends all plow owners use dielectric grease on a regular basis to protect all electrical connections. Specially formulated to protect your connections in severe winter conditions.

Part #22400K (2 oz tube)
Part #8329K (packet)

EMERGENCY PARTS KIT W/BOX - MINUTE MOUNT 2

Be prepared with this handy parts box! Box contains the high volume, genuine factory parts needed for most emergency repairs. Packed in an easy-to-store plastic toolbox with lots of extra room for your tools.

Part #27930 (Emergency Parts Kit w/Box - MM2)

FISHER® EZ FLOW

Fisher EZ FLOW high performance hydraulic fluid is recommended for use where low temperatures or rapid changes in temperatures are expected. For operating temperatures as low as -40F. Results in less electrical current draw from the truck battery during cold weather operations.

Part #28531 (1 quart, min. 12 per case)
Part #28532 (1 gallon, min. 6 per case)
Part #28533 (55 gallon drum)

SILVER PAINT

Genuine factory tough paint provides durable coverage and is mixed to match your original equipment.

Part #27700 (12 oz, spray can)

YELLOW PAINT

Genuine factory tough paint provides durable coverage and is mixed to match your original equipment.

Part #5242 (12 oz spray can, painted)
Part #27242 (12 oz spray can, powder coated)
Part #5492Y (1 quart)
Part #5490Y (1 gallon)

Snow Plow