True Fleet Interchangeability
One Truck. One Control. Any Plow.
With the new Fisher FLEETFLEX Electrical System, you have true fleet interchangeability. Unlike other manufacturers who require a different control for operating either a straight blade or a V-plow, the Fisher FLEETFLEX system lets you operate all plows using ONE CONTROL.
Common Programmable Controls with Built-In SECURITY GUARD™ Anti-Theft System
-
Programmable "soft-stop" and "one-touch" float
-
Easy to Operate
-
Fish-Stik® Hand-held or Joystick Controls
-
Simple Wiring
-
Easier Installation
-
Increased Reliability
SECURITY GUARD™ Anti-Theft System
The exclusive FISHER® SECURITY GUARD Anti-Theft System is a safe and secure way to electronically "lock" your snow plow while it is detached from the truck, providing a deterrent from theft or non-permitted use.
Unlike physical locks that can be cut or removed, the SECURITY GUARD Anti-Theft System electronically synchronizes your control and plow module. When activated, it disables the electronic control system and renders the snow plow inoperable to unauthorized users.
The SECURITY GUARD system comes standard on the HD Series snow plow and provides a valuable tool that can be utilized at your discretion.
Moldboard
Designed for ½-, ¾- and 1-ton four-wheel drive trucks, as well as today’s 15,000 GVW Super Duty vehicles, these snow plow blades are 29” high and built with the heavy 11 gauge steel (12 gauge steel for the 7 ½' blade). Available in 7 ½’, 8’, 8 ½’ and 9’ widths. The full base angle does not require a cutting edge, allowing for more wear. Eight vertical ribs provide superior moldboard reinforcement.
Chain Lift System
-
With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
-
With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.
-
In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.
Fast & Durable Hydraulics
Instead of relying on outside suppliers, we build all our hydraulics ourselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency.
Minute Mount® 2 System
-
The simplest and most trouble-free attachment system available.
-
100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail.
-
The attachment arms and lower gear are flared both vertically and horizontally to make the drive-in connection easy.
Trip-Edge Design
Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the blade stays upright, plowed snow remains in front of the blade. Fisher Engineering’s trip edge uses compression-type springs. They never need adjusting and are never stretched like extension springs, providing the longest life of any type of spring on the market.
In-Cab Controls
Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control.
INTENSIFIRE™ Lights
-
The state-of-the-art reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall.
-
1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp.
-
Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy.
-
Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly.
-
Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.
STORM GUARD™ Baked-On Powder Coat
The industry’s best protection against wear and rust. With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. We’ve added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus our trademark FISHER® yellow finish is reformulated to maintain that new snow plow look even longer.
Learn more about the STORM GUARD Finish.
Minute Mount® 2 System Done in 30 Seconds Spot
