Big Moldboard
Available in 9’ and 10’ blade widths, the MC Series Snow Plow is a full 34” high and made from 11 gauge steel.
Heavy-Duty Features
-
The 9’ blade features two wear-resistant cast iron shoes and four compression type trip springs.
-
The 10’ blade has four cast-iron shoes, and six compression type trip springs.
-
Eight vertical ribs provide structural reinforcement.
-
An 8” center punched reversible cutting edge is standard on both sizes. The cutting edge increases wear resistance and improves cutting power and scraping ability.
Fast & Durable Hydraulics
Instead of relying on outside suppliers, we build all our hydraulics ourselves, for unmatched speed and durability. Fast responsive hydraulics maximize snowplowing efficiency.
Chain Lift System
-
With the chain lift system, you get instantaneous “float” when lowering the blade. Unrestricted, the blade can freely follow the contours of the plowing surface for a cleaner scrape.
-
With the chain lift you can stack higher because you’re not limited by the hydraulic ram stroke, unlike cylinder lift systems, which can only pull the plow up as far as the limits of the cylinder’s range.
-
In the rare event of a hydraulic failure, you can push the plow up into a snow bank and “short chain” the plow by attaching it to the specially designed bracket and safely transport the plow back to the shop.
Trip-Edge Design
Only the edge of the blade trips when an obstacle is encountered. It’s much less jarring than a full-trip blade, and because the blade stays upright, plowed snow remains in front of the blade. Fisher Engineering’s trip edge uses compression-type springs. They never need adjusting and are never stretched like extension springs, providing the longest life of any type of spring on the market.
In-Cab Controls
Hand-held control with backlit directional buttons provides precise response. Choose between the convenient hand-held Fish-Stik® control with power “on” and “float” LED and automatic shut-off, or the compact joystick control.
Minute Mount® 2 System
-
The simplest and most trouble-free attachment system available.
-
100% mechanical design means there are no electrical components or hydraulic assist gimmicks to fail.
-
The attachment arms and lower gear are flared both vertically and horizontally to make the drive-in connection easy.
INTENSIFIRE™ Lights
-
The state-of-the-art reflector optics provide a smooth wide beam pattern that illuminates the entire plowing surface, with minimal glare above the lamp, especially during snowfall.
-
1,500 hour, H I 3, long-life headlamp bulb minimizes bulb replacement over the life of the lamp.
-
Three-screw bulb access cover attachment and twist-in headlamp bulb makes replacement quick and easy.
-
Lens is adhesive bonded to the reflector and the reflector is adhesive bonded to the housing, sealing out water that could potentially freeze and damage the assembly.
-
Robust, two-stud mounting keeps the lamp in its original mounting position – even when subjected to the harshest shock and vibration forces.
STORM GUARD™ Baked-On Powder Coat
The industry’s best protection against wear and rust. With the STORM GUARD powder coating process, the automated climate-controlled powder booth ensures uniform coverage to all surfaces. We’ve added a new epoxy primer to further enhance powder coat adhesion and improve corrosion resistance. Plus our trademark FISHER® yellow finish is reformulated to maintain that new snow plow look even longer.
Learn more about the STORM GUARD Finish.
Minute Mount® 2 System Done in 30 Seconds Spot
