|
|
| |
| |
| Additional Features |
|
 |
|
| THE ORIGINAL TRIP-EDGE DESIGN |
|
|
Only the edge of the
blade trips back when an obstacle
is encountered. Because the blade
stays upright, plowed snow in front
of the blade stays put.
|
|
| View Animation. |
|
 |
|
| INDUSTRY BEST PROTECTION AGAINST WEAR AND RUST! |
|
|
With the
Storm Guard™ powder coating
process, automated climate
controlled powder booths ensure
uniform coverage to all surfaces.
|
|
 |
|
| INDUSTRY BEST HALOGEN ILLUMINATION! |
|
|
The new FISHER® INTENSIFIRE™
plow lights are flat out the best
and brightest halogen light system
you can buy.
|
|
| Learn more about the Intensifire. |
|
|
| |
|
|
 |
|
 |
|
| 1st Step |
|
|
To attach the snowplow, simply drive into the
mount.The attachment arms and lower gear are
flared both vertically and horizontally to make the
drive-in connection easy. Once the mount has
completely engaged the lower gear, raise the pin
release handle, readying the spring loaded
connecting pins to engagement.
|
| 2nd Step |
|
|
With just a little push on the headgear, the spring
loaded pins pop into place, completing the
attachment of the MINUTE MOUNT® 2 SYSTEM.
|
| 3rd Step |
|
|
Pull the jack lock, snap the handle into its storage
clip, and raise the jack stand.The jack lock
automatically keeps the jack in the raised position.
Connect the electrical connectors, and that's it!
|
| Plow Removal |
|
|
Removing the plow is even easier. After lowering the
blade, pull out on the jack lock and the jack
automatically drops to the ground.While pushing on
the headgear, lower the pin release handle to
disengage the connecting pins. Unplug the electrical
connectors and you are done!
|
|
|