HD2™ ACCESSORIES

Filter By
Filter By

BACK DRAG EDGE KIT

Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER®. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging.

Part Numbers
#51996 For 7' 6" Models
#51997 For 8' Models
#51998 For 8' 6" Models
#51999 For 9' Models

WING EXTENSIONS

Expand the carrying capacity of your HD2™ snow plow with our custom blade wings. Steel cutting edges and our trip edge design provide a clean scrape and added protection when encountering hidden obstacles. Wings extend at a 60° angle, increasing the effective plowing width by 20".

Part Numbers
#41790 For All Models

CUTTING EDGE - RUBBER

If the job requires a more gentle approach, we have you covered. This tough high-wear rubber cutting edge is ideal for sensitive surfaces such as concrete and brick pavers.

Part Numbers
#52118 For 7' 6" Models
#52118 For 8' Models
#52119 For 8' 6" Models
#52120 For 9' Models

SHOE KIT - CAST IRON

Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation.

Part Numbers
#52506 For All Models

CURB WEAR KIT

Curbing can come out of nowhere sometimes. Protect your blade with a pair of genuine FISHER® curb guards. Constructed of abrasion-resistant material and designed to fit tight to the blade, these curb guards will allow you to plow along curbs with confidence and precision, without damaging your blade.

Part Numbers
#51879 For 7' 6", 8' & 8' 6" Models
#51880 For 9' Models

CURB GUARD KIT - CAST IRON

Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER®. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.

Part Numbers
#44405 For 7' 6", 8' & 8' 6" Models
#44406 For 9' Models

CUTTING EDGE - CARBIDE

Looking for a cutting edge with extreme wear resistance? You need to experience one of these genuine FISHER® carbide cutting edges. Made from 3/4" high carbon steel with a carbide insert, this cutting edge can provide up to 15 times the service life of other cutting edges, keeping you out plowing and improving your bottom line.

Part Numbers
#52147 For 7' 6" Models
#52148 For 8' Models
#52149 For 8' 6" Models
#52150 For 9' Models

CUTTING EDGE - POLY

If the job requires a more gentle approach, we have you covered. Designed to be light weight yet extremely durable, this high-density polymer cutting edge is ideal for sensitive road surfaces such as pea stone and cobble stone.

Part Numbers
#22216 For 7' 6" Models
#52168 For 8' Models
#52169 For 8' 6" Models
#52170 For 9' Models

CUTTING EDGE - 1/2" STEEL

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#50678 For 7' 6" Models
#5533 For 8' Models
#26460 For 8' 6" Models
#5534 For 9' Models

CUTTING EDGE - 3/8" STEEL

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#5532 For 7' 6" Models

CUTTING EDGE - 5/8" STEEL

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment.

Part Numbers
#52675 For 7' 6" Models
#52680 For 8' Models
#52685 For 8' 6" Models
#52690 For 9' Models

10" RUBBER DEFLECTOR

Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.

Part Numbers
#52094 For 7' 6" Models
#52095 For 8' Models
#52096 For 8' 6" & 9' Models

18" RUBBER DEFLECTOR

Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.

Part Numbers
#52097 For 7' 6" Models
#52098 For 8' Models
#52099 For 8' 6" & 9' Models

STEEL DEFLECTOR

Extend the height of your blade and help keep snow off the windshield without affecting your ability to stack snow with a genuine FISHER® Steel Deflector. Made of powder coated mild steel, this deflector is designed to be an exact fit for your blade and provide improved plowing efficiency.

Part Numbers
#41844 For 7' 6" Models
#41845 For 8' Models
#41846 For 8' 6" Models
#41847 For 9' Models

HEAVY-DUTY LIFT RAM

Improve your blade's lifting force with this larger diameter ram. Helps to offset increased plow weight when using a wing kit or other combinations of blade accessories that increase the weight of the blade.

Part Numbers
#43132 For All Models

SHOE KIT - ADJUSTABLE

Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of abrasion-resistant steel for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation. (The adjustable shoe kit is not compatible with the use of a back drag edge.)

Part Numbers
#41785 For All Models

STEEL SnoFoil®

Blaze through deep snow with a genuine steel SnoFoil® from FISHER®. The curved rigid design provides excellent snow rolling performance, which ensures that you have visibility while plowing regardless of the conditions. Made of reinforced steel and coated with our durable Storm Guard™ black powder coating, this kit contains all the necessary hardware and instructions for an easy install.

Part Numbers
#52488 For All Models

COMMERCIAL BLADE GUIDE KITS

Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER® branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.

Part Numbers
#26530K 24" for All Models
#51975 36" for All Models

FLEX ARM™ KIT

This quick-release, flexible control mount adjusts into any position. The magnetic base allows for easy removal with no mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.

Part Numbers
#62490

PLOW PARKA

This heavy-duty FISHER® branded nylon cover protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.

Part Numbers
#26812-1 For All Models

CONTROL CUP HOLDER MOUNT

The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER® hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.

Part Numbers
#82006 For All Models

FREEZE GUARD™ GREASE

Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD™ Grease is available in cartridges, pails, totes and drums.

Part Numbers
#72901 14oz. Cartridges
#72902 7 lb Pail
#72903 120 lb Tote
#72904 400 lb Drum