STEEL-CASTER™ (0.35 & 0.7 cu yd) ACCESSORIES

Filter By
Filter By

EXTENSION COLLARS

An extension collar is available as an accessory to increase material capacity for vehicles that can handle the additional weight. 0.25 cu yd extension collars available for the 0.35 cu yd hoppers and 0.5 cu yd extension collars available for the 0.7 cu yd hoppers.

Part Numbers
#85698 For 0.35 cu yd Models
#85699 For 0.7 cu yd Models

50-GALLON PRE-WET & DIRECT LIQUID APPLICATION KIT

With the addition of this accessory to the 0.7 cu yd model, operators will have the ability to pre-wet materials or spray brine directly onto the driving surface for anti-icing applications. The accessory kit includes two 25-gallon pre-wet tanks, a pump and a spray kit.

Part Numbers
#85695 For 0.7 cu yd Models

SPILL GUARD KIT

A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60" for the 0.35 cu yd model and 75.5" for the 0.7 cu yd model. This allows loading with a 5' loader bucket and prevents overflow and spill into the bed of the vehicle.

Part Numbers
#85696 30" Kit for 0.35 cu yd Models
#85697 43" Kit for 0.7 cu yd Models

LED WORK LIGHT KIT

See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.

Part Numbers
#99505-1 For All Models

LED STROBE LIGHT KIT

Make sure you're seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you're seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.

Part Numbers
#99494 For All Models

CENTRAL POINT GREASE KIT

The Central Point Grease Kit provides easy access to grease points, simplifying preventative maintenance greasing that is essential to maximize bearing life.

Part Numbers
#11763 For 0.7 cu yd Models

VIBRATOR KIT

Loosen up stubborn materials and prevent bridging with this Vibrator Kit. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.

Part Numbers
#76668 For All Models

INVERTED V KIT

Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.

Part Numbers
#85706 For 0.35 cu yd Models
#85707 For 0.7 cu yd Models

RATCHET TIE-DOWN KIT

This Tie-Down Kit provides additional in-bed stability and security. The 4,000 pound, high-strength shipping straps allow you to add an extra measure of safety as you move tons of salt down the road. Each kit includes four ratchet tie down assemblies. (Hoppers require bolting to the truck frame for proper operator safety.)

Part Numbers
#68790 For All Models

TRUCK UPFIT KIT

This kit contains a longer truck harness, license plate kit, CHMSL kit, and a ratchet tie down kit so the 0.35 cu yd hopper can be used in place of an auger tailgate spreader when using sand.

Part Numbers
#85693 For 0.35 cu yd Models

SPREADER CONTROL ADAPTER PLATE FOR CUP HOLDER MOUNT

Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware. Cup Holder Mount not included, order separately (#82006).

Part Numbers
#82018 For All Models

CONTROL CUP HOLDER MOUNT

The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER® hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.

Part Numbers
#82006 For All Models

LICENSE PLATE KIT

Stay street legal with this illuminated License Plate Kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot that is visible and legally compliant. Don't leave without it. Required if using 0.35 cu yd hopper on a truck.

Part Numbers
#85694 For 0.35 cu yd Models

VEHICLE-SIDE HARNESS KIT

The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.

Part Numbers
#78402 For 0.7 cu yd Models
#85692 For 0.35 cu yd Models

DIELECTRIC GREASE

Keep your FISHER® plow running strong. Apply our specially formulated dielectric grease after each use to prevent corrosion caused by electrolysis and highly corrosive de-icing agents.

Part Numbers
#22400K 2 oz. Tube

FREEZE GUARD™ GREASE

Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD™ Grease is available in cartridges, pails, totes and drums.

Part Numbers
#72901 14oz. Cartridges
#72902 7 lb Pail
#72903 120 lb Tote
#72904 400 lb Drum