STEEL-CASTER™ (0.35 cu yd) ACCESSORIES
Designed for UTVs and compact trucks that can handle the extra weight, a 0.25 cu yd extension collar is available as an accessory to increase material capacity.
|#85698||For 0.35 cu yd Models|
SPILL GUARD KIT
A Spill Guard Kit provides the loader with an improved line of sight to the hopper edges, extending the edges of the hopper to 60" for the 0.35 cu yd model. This allows loading with a 5' loader bucket and prevents overflow and spill into the bed of the vehicle.
|#85696||30" Kit for 0.35 cu yd Models|
LED WORK LIGHT KIT
See more to do more with the Work Light Kit for better visibility at the rear of your spreader at night. Encased in anodized aluminum, and good to less than minus 20 degrees, this LED work light will put over 1000 lumens where you need them, when you need them. The LEDs mean low amp draw, so you can easily use more than one.
|#99505-1||For 0.35 cu yd Models|
LED STROBE LIGHT KIT
Make sure you're seen, day or night, with our Strobe Lights for added visibility during operation. Encased in high impact plastic, this yellow LED strobe works in temperatures as cold as -20°F and will ensure that you're seen in all but the worst of conditions. Make sure you spread safely with strobe light markers.
|#99494||For 0.35 cu yd Models|
Loosen up with this Vibrator Kit to help move stubborn material and prevent bridging. Featuring a 200V DC vibrator motor in a metal housing, our vibrator will help prevent bridging and clogging, improving material flow so you can do your job faster and better.
|#76668||For 0.35 cu yd Models|
INVERTED V KIT
Reduce heavy startup loads on the drivetrain and potential bridging during operations with the optional inverted V. Made of 12 gauge 201 stainless steel, the inverted V is strong and corrosion resistant, for use in highly demanding environments. The inverted V is easy to assemble and install and will provide years of trouble free use.
|#85706||For 0.35 cu yd Models|
LICENSE PLATE KIT
Stay street legal with this illuminated License Plate Kit for your alternate license plate location. Providing convenient mount methods and lighting in a high impact plastic casing, the license plate kit allows you to move your license to a spot that is visible and legally compliant. Don't leave without it. Required if using 0.35 cu yd hopper on a truck.
|#85694||For 0.35 cu yd Models|
RATCHET TIE-DOWN KIT
This Tie-Down Kit provides additional in-bed stability and security. The 4,000 pound, high-strength shipping straps allow you to add an extra measure of safety as you move tons of salt down the road. Each kit includes four ratchet tie down assemblies. (Hoppers require bolting to the truck frame for proper operator safety.)
|#68790||For 0.35 cu yd Models|
TRUCK UPFIT KIT
This kit contains a longer truck harness, license plate kit, CHMSL kit, and a ratchet tie down kit so the 0.35 cu yd hopper can be used in place of an auger tailgate spreader when using sand.
|#85693||For 0.35 cu yd Models|
UTV SPREADER CONTROL SHIELD
Keep your UTV spreader control protected from the elements with the UTV Spreader Control Shield. A molded, plastic “visor” attaches to the top of the UTV spreader control to protect it from the rain or snow.
|#78585||For 0.35 cu yd Models|
SPREADER CONTROL ADAPTER PLATE FOR CUP HOLDER MOUNT
Gain the flexibility and easy installation benefits of the cup holder control mount with every spreader installation using the new Spreader Control Adapter Plate Kit. Kit contains a durable metal mounting plate and hardware. Cup Holder Mount not included, order separately (#82006).
|#82018||For 0.35 cu yd Models|
CONTROL CUP HOLDER MOUNT
The Control Cup Holder Mount is designed to fit firmly in most vehicle cup holders. It's a genuine, factory-tough accessory specifically engineered to securely hold FISHER® hand-held or joystick controls and all types of smart phone devices (not included with mount). This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning.
|#82006||For All Models|
VEHICLE-SIDE HARNESS KIT
The Vehicle-Side Harness Kit contains components to replace harnessing on the truck or wire a second truck to operate the spreader.
|#78402||For 0.35 cu yd Models|
Keep your FISHER® spreader running strong. Apply our specially formulated dielectric grease after each use to prevent corrosion caused by electrolysis and highly corrosive de-icing agents.
|#22400K||2 oz. Tube|
FREEZE GUARD™ GREASE
Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD™ Grease is available in cartridges, pails, totes and drums.
|#72902||7 lb Pail|
|#72903||120 lb Tote|
|#72904||400 lb Drum|