Back Drag Edge Kit

Achieve cleaner results and increased efficiency with a genuine back drag edge from FISHER®. Made from 1/4 inch abrasion-resistant steel and custom fit to your blade, this back drag edge will improve results by providing a clean scrape while back dragging. (The back drag edge is not compatible with the use of a shoe kit.)

Part Numbers
#44281-3
#44282-3
#44283-3
For 7' 6" models
For 8' 6" models
For 9' 6" and 10' 6" models

Curb Guard Kit - Cast Iron

Curbing can seemingly come out of nowhere sometimes; protect your blade with a pair of genuine curb guards from FISHER®. These simple-to-install curb guards are made of cast iron for ultimate wear-resistance, and also feature a rounded profile which reduces damage to curbing as well as the blade.

Part Numbers
#44406 For all models

Blade Stop Kit

Beef up your blade and prepare for extreme plowing conditions with genuine FISHER® Blade Stops, designed to transfer extreme impacts throughout the blade's structure and reduce stress on the hydraulic rams. This kit comes with all of the necessary hardware and instructions for easy installation.

Part Numbers
#44473
For all models

Deflector - Rubber - 10"

Dress up your blade and improve functionality with a genuine FISHER® rubber deflector. Made from 2-ply heavy-duty rubber and accented with the FISHER logo, this easy-to-install Rubber Deflector Kit will provide improved visibility by deflecting snow forward instead of onto your windshield.

Part Numbers
#44710
For all models

Wing Extensions

Expand the carrying capacity of your XtremeV snow plow while cleaning up by adding a pair of genuine FISHER® extension wings. These extension wings feature durable poly cutting edges which also function as a trip mechanism in the event that an obstruction is encountered. Wings extend at a 35° angle, increasing the effective plowing width by 12". (Not available for 7' 6" blades)

Part Numbers
#44610-1
#44610-1
For 8' 6" models
For 9' 6" models

Carbide Cutting Edge

Abrasive surfaces and increased plowing speeds often found in municipal and commercial applications can increase the wear rate of standard-steel cutting edges. Combat high replacement cycles with FISHER carbide cutting edge kits for the 8' 6" and 9' 6" XtremeV.

Part Numbers
#86887
#86885
For 8' 6" models
For 9' 6" models

Poly Cutting Edge

Sensitive surfaces found in many residential and commercial applications require a more forgiving approach. Reduce the risk of property damage with poly cutting edge kits for the 8' 6" and 9' 6" XtremeV.

Part Numbers
#86881
#86878
For 8' 6" models
For 9' 6" models

Cutting Edge – Steel, 1/2"

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment. Hardware and center edges included.

Part Numbers
#44742-2
#44743-2
#44744-2
For 7' 6" models
For 8' 6" models
For 9' 6" models

Cutting Edge – Steel, 3/8"

Keep your blade at the top of its game by installing a genuine FISHER® cutting edge. Made of tough high carbon steel, a cutting edge will increase wear resistance and restore your worn base angle to the proper geometry which is vital to protect you and your equipment. Hardware and center edges included.

Part Numbers
#44740-2
#44741-2
For 7' 6" models
For 8' 6" models

Shoe Kit

Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER® shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation. (The shoe kit is not compatible with the use of a back drag edge.)

Part Numbers
#50700

For all models

High Wear Shoe Kit

Improve blade float or reduce cutting edge wear rates with the new high wear shoe kit. Composed of wear-resistant AR400 material, these kits are less brittle, offer better wear rates than cast iron and are designed with aggressive municipal and commercial plowing applications in mind.

Part Numbers
#86870 For all models

Commercial Blade Guide Kits

Commercial Blade Guides are made from durable and highly visible fluorescent orange material and feature FISHER® branded reflective tape. Available in 24" or 36" lengths, these blade guides provide improved visibility and enhance your ability see the position of your blade.

Part Numbers
#26530K
#51975
24" for all models
36" for all models

FLEX ARM Kit

This quick-release, flexible control mount adjusts into any position. The magnetic base allows for easy removal with no mounting holes in your dash. Can be used with most plow and spreader controls. Base plate included.

Part Numbers
#62490 For all models

Plow Parka

This heavy-duty FISHER® branded nylon cover protects electrical and hydraulic systems and includes elastic sewn into the bottom for a tight, weather-resistant fit.

Part Numbers
#26812-1 For all models

SNOWPLOW CONTROL CUP HOLDER MOUNT

Effortlessly secure FISHER plow controls or your smartphone* with the Snowplow Control Cup Holder Mount designed to fit firmly into most size cup holders in your vehicle. This flexible gooseneck mount has a 360-degree rotation and ensures optimal, customizable positioning. The Snowplow Control Cup Holder Mount is a genuine, factory-tough accessory specifically engineered to hold FISHER hand-held or joystick plow controls and all types of smart phone devices.

*Snowplow controls and/or smartphone not included

Part Numbers
#82006

FREEZE GUARD GREASE

Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD Grease is available in cartridges, pails, totes and drums.

Part Numbers
#72901
#72902
#72903
#72904
Freeze Guard Grease - 14oz Cartridges
Freeze Guard Grease - 7 lb Pail
Freeze Guard Grease - 120 lb Tote
Freeze Guard Grease - 400 lb Drum