Skid-Steer Snowplows

NON-TRUCK PLOWS

DROP THE BAR & GRAB THE HANDLES. IT’S GO TIME.

Skid-Steer Snowplows

NON-TRUCK PLOWS

DROP THE BAR & GRAB THE HANDLES. IT’S GO TIME.

Snowplow Skid-Steer

The Quick Way to Get A LOT Done

Put your skid-steer to work with an XRS^™, HDX^™ or HD2^™ snow plow. Built to handle the extra demands of skid-steer operation, the XRS, HDX and HD2 plows offer fast and easy hook up, adding versatility to your snow-clearing arsenal. Clear large parking lots, maneuver between cars and parking islands, and get the most out of your skid-steer this winter.

Type of Snowplow

Skid-Steer

Unique Features

Oscillating Skid-Steer Mounting Plate
Operator Step
XRS™ for Skid-Steers
HDX™ for Skid-Steers
HD2™ for Skid-Steers

Oscillating Skid-Steer Mounting Plate

The oscillating skid-steer mounting plate gives you six degrees of side-to-side travel that follows contours to improve scraping and cutting edge wear while reducing damage to parking lot surfaces.

This design uses the skid-steer loader’s bucket hydraulics to lift and lower the blade for a more intuitive operator experience.

Standard on XRS™; available as an option on HD2™ and HDX™

Operator Step

Both FISHER^® skid-steer mounting plates feature a step that allows operators to easily get in and out of the skid-steer.

XRS™ for Skid-Steers

For Maneuverability and Efficiency

Maneuver snow like never before with the responsive XRS skid-steer plow. Designed specifically for skid-steer applications, this rugged plow automatically retracts the inside wing when fully angled and then automatically returns to the scoop position once straight.

HDX™ for Skid-Steers

For Maximum Durability

The stainless steel HDX™ skid-steer snow plow features an adjustable attack angle that lets you customize your setup for plowing surfaces, weather conditions and plowing preferences.

The skid-steer’s hydraulic components provide the ability to angle the blade for maneuverability and efficiency. Relief valves protect the operator and the equipment when encountering hidden obstacles.

Learn More About HDX

HD2™ for Skid-Steers

For the Best Value

The powder coated HD2™ skid-steer plow stands up to the extra demands of skid-steer operation year after year.

The skid-steer’s hydraulic components provide the ability to angle the blade for maneuverability and efficiency. Relief valves protect the operator and the equipment when encountering hidden obstacles.

Learn More About HD2

Featured Accessories

10" RUBBER DEFLECTOR

Dress up your blade and improve functionality with a genuine FISHER^® rubber deflector. Made from 2-ply, heavy-duty rubber and accented with the FISHER logo, this easy-to-install rubber deflector kit will provide improved visibility by deflecting snow forward instead of onto your windshield.

SHOE KIT

Ideal for dirt or crushed stone road surfaces, a shoe kit will provide you with the ability to adjust the scraping height of the blade. Genuine FISHER^® shoes are made of cast iron for maximum longevity and durability. Shoe kits include two shoes and all mounting hardware for easy installation. (The shoe kit is not compatible with the use of a back drag edge.)

QUICK COUPLER SET

Quick couplers allow for an easy, tool-free connect and disconnect of plow hydraulic lines to standard flat-faced skid-steer hydraulic couplers. Set comes with male and female couplers.

FREEZE GUARD™ GREASE

Specially formulated to protect moving components in arctic mining conditions, this grease is ideal for bearings, hinges and pivot bolts on snow and ice control equipment. The custom formula maintains viscosity from -40 up to 300 degrees, and military-grade, corrosion-prevention additives protect equipment from corrosion without harmful environmental impact. FREEZE GUARD^™ Grease is available in cartridges, pails, totes and drums.

Specifications

Models	8' 7" XRS	7' 6" HD2	8' HD2	8' 6" HD2	9' HD2	8' HDX	9' HDX
Blade Width	8' 7" Scoop 9' 8" Wings Pinned	7' 6"	8'	8' 6"	9'	8'	9'
Blade Width	2.6 m Scoop 2.9 m Wings Pinned	2.29 m	2.44 m	2.59 m	2.74 m	2.44 m	2.74 m
Blade Height	29 ½"	29"	29"	29"	29"	29"	29"
Blade Height	75 cm	73.66 cm	73.66 cm	73.66 cm	73.66 cm	73.66 cm	73.66 cm
Blade Gauge	12	12	12	12	12	12	12
Blade Gauge	2.66 mm	2.66 mm	2.66 mm	2.66 mm	2.66 mm	1.90 mm	1.90 mm
Trip Springs	4	3	4	4	4	4	4
Trip Springs	4	3	4	4	4	4	4
Ribs	8	10	10	10	10	8	8
Ribs	8	10	10	10	10	8	8
Angling Rams	1 ½" x 10"	1 ½" x 12"	1 ½" x 12"	1 ½" x 12"	1 ½" x 12"	1 ½" x 12"	1 ½" x 12"
Angling Rams	3.81 cm x 25 cm	3.81 cm x 30.48 cm	3.81 cm x 30.48 cm	3.81 cm x 30.48 cm	3.81 cm x 30.48 cm	3.81 cm x 30.48 cm	3.81 cm x 30.48 cm
Plowing Width (Full Angle)	7' 10"	6' 9"	7' 2"	7' 7"	8' 1"	7' 2"	8' 1"
Plowing Width (Full Angle)	2.4 m	2.05 m	2.19 m	2.32 m	2.46 m	2.19 m	2.46 m
Approx. Weight*	1,125 lb	684 lb	734 lb	750 lb	770 lb	861 lb	902 lb
Approx. Weight*	510.29 kg	310 kg	332 kg	340 kg	349 kg	391 kg	409 kg
Cutting Edge	½" x 6" Steel	⅜" x 6" Steel	½" x 6" Steel	½" x 6" Steel	½" x 6" Steel	½" x 6" Steel	½" x 6" Steel
Cutting Edge	1.27 cm x 15.24 cm Steel	0.95 cm x 15.24 cm Steel	1.27 cm x 15.24 cm Steel	1.27 cm x 15.24 cm Steel	1.27 cm x 15.24 cm Steel	1.27 cm x 15.24 cm Steel	1.27 cm x 15.24 cm Steel
Mount Type	Oscillating Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate
Mount Type	Oscillating Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate	Universal Skid-Steer Mounting Plate